How To Install OpenStack and Magnum Clients for Command Line Interface to Eumetsat Elasticity Horizon

How To Issue Commands to the OpenStack and Magnum Servers

There are three ways of working with Kubernetes clusters within Openstack Magnum and Horizon modules:

Horizon Commands

You issue Horizon commands using mouse and keyboard, through predefined screen wizards. It is the easiest way to start but not the most productive in the long run.

Command Line Interface (CLI)

CLI commands are issued from desktop computer or server in the cloud. This approach allows you to save commands as text and repeat them afterwards. This is the preferred way for professionals.

HTTPS Requests to the Magnum Server

Both the Horizon and the CLI use HTTPS requests internally and in an interactive manner. You can, however, write your own software to automate and/or change the state of the server, in real time.

What We Are Going To Cover

  • How to install the CLI – OpenStack and Magnum clients

  • How to connect the CLI to the Horizon server

  • Basic examples of using OpenStack and Magnum clients

Notes On Python Versions and Environments for Installation

OpenStack is written in Python so you need to first install a Python working environment and then install the OpenStack clients. Officially, OpenStack runs only on Python 2.7 but you will most likely only be able to install a version 3.x of Python. During the installation, adjust accordingly the numbers of Python versions mentioned in the documentation.

You will be able to install Python on any of the popular platforms, such as Windows, MacOS, Linux on a desktop computer. Or, supposing you are logged into Horizon interface, you can use commands Compute => Instances to create an instance of a virtual machine. Then install the Python there. Ubuntu 18.04 or 20.04 would serve best in this regard.

Warning

Once you install Kubernetes cluster you will have also have installed instances with Fedora 33 or 35, say, for the master node of the control plane. You can install the Python and OpenStack clients there as well but Ubuntu is much easier to use and is the preferred solution in this case.

You can install the Python and the clients on several environments at once, say, on a desktop computer and on a virtual machine on the server, at the same time. Following the instructions in this tutorial, they will all be connected to one and the same Kubernetes cluster anyway.

Note

If you decide to install Python and the OpenStack clients on a virtual machine, you will need SSH keys in order to be able to enter the working environment. See How to create key pair in OpenStack Dashboard on Eumetsat Elasticity.

Prerequisites

No. 1 Hosting

You need a Eumetsat Elasticity hosting account with Horizon interface https://horizon.cloudferro.com/auth/login/?next=/.

No. 2 Installation of OpenStack CLI on Ubuntu 20.04 Server

The article How to install OpenStackClient for Linux on Eumetsat Elasticity shows how to install OpenStack client on Ubuntu server. That Ubuntu may be the desktop operating system, a virtual machine on some other operating system, or an Ubuntu server in the cloud.

Installation on Mac OS will be similar to the installation on Ubuntu.

No. 3 Installation of OpenStack CLI on Windows

The article How to install OpenStackClient GitBash for Windows on Eumetsat Elasticity shows installation on Windows.

No. 4 General Instructions for Installation of OpenStack Clients

There are various ways of installing Python and the required clients. For instance, on MacOS, you can install the clients using Python PIP or install them natively, using homebrew.

The article Install the OpenStack command-line clients will give a systematic introduction to installation of OpenStack family of clients on various operating systems.

Once installed, the CLI commands will be identical across various platforms and operating systems.

No. 5 Connect openstack command to the cloud

After the successful installation of openstack command, it should be connected to the cloud. Follow this article for technical details: /accountmanagement/How-to-activate-OpenStack-CLI-access-to-Eumetsat-Elasticity-cloud-using-one-or-two-factor-authentication.

Step 1 Install the CLI for Kubernetes on OpenStack Magnum

In this step, you are going to install clients for commands openstack and coe, from modules OpenStack and Magnum, respectively.

Follow the Prerequisites Nos. 2, 3 or 4 to install the main client for OpenStack. Its name is python-openstackclient and the installation described in those will typically contain a command such as

pip install python-openstackclient

If you have installed OpenStackClient using those prerequisite resources, we shall assume that the openstack is available and connected to the cloud.

At the end of installation from either of the prerequisite articles, install Magnum client by issuing this command:

pip install python-magnumclient

Step 2 How to Use the OpenStack Client

In this step, you are going to start using the OpenStack client you have installed and connected to the cloud.

There are two ways of using the OpenStackClient. If you enter the word openstack at the command prompt of the terminal, you will enter the special command line interface, like this:

../_images/openstack_cli.png

The benefit would be that you do not have to type openstack keyword for every command.

Type quit to leave the openstack internal command line prompt.

The preferred way, however, is typing the keyword openstack, followed by parameters and running from terminal command line.

Openstack commands may have dozens of parameters so it is better to compose the command in an independent text editor and then copy and paste it into the terminal.

The Help Command

To learn about the available commands and their parameters, type –help after the command. If applied to the keyword openstack itself, it will write out a very long list of commands, which may come useful as an orientation. It may start out like this:

../_images/openstack_help.png

This is how it ends:

../_images/openstack_vim.png

The colon in the last line means that the output is in vi (or vim) editor. To leave it, type letter q and press Enter on the keyboard.

Prerequisites No. 3 and 4 lead to official OpenStack user documentation.

Here is what happens when you enter a wrong parameter, say, networks instead of network:

openstack networks list
../_images/networks_list.png

You get a list of commands similar to what you just typed.

To list networks available in the system, use a singular version of the command:

openstack network list
../_images/network_list.png

Step 4 How to Use the Magnum Client

OpensStack command for the server is openstack but for Magnum, the command is not magnum as one would expect, but coe, for container orchestration engine. Therefore, the commands for clusters will always start with openstack coe.

See cluster commands by entering

openstack coe

into the command line:

../_images/openstack_coe.png

You can see the existing clusters using the following command:

openstack coe cluster list
../_images/openstack_coe_cluster_list.png

This is more or less the same information that you can get from the Horizon interface:

../_images/cluster_list_horizon.png

after clicking on Container Infra => Clusters.

Prerequisite No. 5 offers more technical info about the Magnum client.

What To Do Next

In this tutorial you have

  • installed the OpenStack and Magnum clients

  • connected them to the server, then used

  • openstack command to access the server in general and

  • coe to access the clusters in particular.

  • the advantages of using the CLI instead of Horizon interface, showing

  • how to create a cluster template as well as

  • how to create a new cluster

all via the CLI.